The lift is the asset nobody in your building thinks about until it stops working, and then everybody thinks about it at once. Tenants, the body corporate, and whoever is standing between levels four and five waiting for someone to arrive. Choosing a lift maintenance provider is one of the few facilities decisions where a wrong call stays wrong for years, because the damage arrives slowly.
What you are actually buying
Lift companies sell attendance. Scheduled visits, callouts, hours on site. What you need is a lift that runs and a maintenance record that holds up when someone asks to see it.
Those two things are connected in a way that catches building managers out. In New Zealand, a lift is a specified system under the Building Act 2004. It sits on your building’s compliance schedule, which sets out the inspection, maintenance and reporting procedures the lift has to follow, and it has to be covered by the Building Warrant of Fitness (BWoF) you sign, display and supply to your council every 12 months.
What matters is what sits behind the warrant. Each year an Independent Qualified Person (IQP) has to issue a Form 12A certifying that every procedure on the compliance schedule was fully complied with, and they cannot sign it if the evidence is not there. Your servicing provider is the one holding those records, and if they are thin, you are the one explaining to council why your BWoF is late. Check what your compliance schedule actually requires for the lift rather than assuming, because the procedures are specific to your building.
Choosing a lift maintenance provider: the five things worth checking
1. Their safety record, not the one they choose to show you
Most building managers never ask for this, and it is the criterion that matters most on the day something goes wrong. Ask for entrapment rate per lift per year and incident history across the provider's portfolio, then ask how they define an entrapment, because the definition does a lot of quiet work. A lift company that offers you only its flattering number is answering a question you did not ask.
2. How fast they respond, and who actually turns up
Ask for entrapment response and general breakdown response as two separate commitments, because they are two different promises and good providers quote them differently. Then ask the harder question: how many technicians sit within reasonable travel of your building, what are they licensed and trained to work on, and do they subcontract after hours? A four-hour commitment means very little if it is met by a contractor who has never opened your controller family before.
3. What the contract excludes
The inclusions list is marketing. The exclusions list is the contract. Read that one first. Parts, door equipment, controller faults, obsolete components and after-hours attendance are the usual carve-outs, and they are where a competitive monthly rate quietly turns into an expensive year. Ask for a worked example: if the door operator fails in month seven, what arrives on the invoice?
4. The records they keep, and whether you can have them
Ask to see a sample logbook entry and a sample condition report from a real building. You are looking for detail that means something, not a tick in a box. Ask which standards their maintenance regime is built around, too. Lifts in New Zealand are governed by Building Code clause D2, which cites NZS 4332 and the EN 81 series for passenger lifts, and your compliance schedule lists the lift under specified system SS 8. A provider who cannot tell you how their programme maps to those procedures is telling you something. Then, confirm the records belong to you and travel with the lift if you ever change provider. Some contracts are quiet on this point on purpose.
5. Whether they can see a fault before you do
A connected lift reports door faults, unusual ride behaviour and component wear back to the provider, so the visit gets planned instead of triggered by a phone call from an angry tenant. That is how 24/7 Connected Services works on our own contracts. Ask what data your provider collects and what you get to see. If the answer is a monthly PDF with nothing behind it, the monitoring is not doing much for you.
The gap between reacting and predicting is worth putting numbers on. KONE's connected maintenance reports around 30% less downtime and 55% fewer entrapments, with up to 70% of faults identified before they become a problem. Results vary by site, equipment and connectivity, which is part of why figures like these are worth asking any provider to provide evidence rather than take on trust.
Remote service goes further again. On a connected lift, some faults can be fixed over the air, and a trapped passenger can be released remotely in around a minute instead of waiting for a technician to reach the building. KONE Remote Service does exactly that, and the remote actions do not override any of the lift's mechanical safety features. Whoever you are considering, it is worth asking what they can resolve without sending someone out.
The two contract models, and what each really covers
Most lift service agreements in New Zealand fall into one of two shapes, and the names vary between providers, so read the scope rather than the label on the front page.
The lighter model covers scheduled attendance, lubrication, adjustment and inspection. Parts and repairs are billed separately as they arise. It looks cheaper on the monthly line and it can be the right call for a newer lift still under warranty, where failures should be rare and the manufacturer is carrying the risk anyway.
The comprehensive model bundles parts, labour and callouts into the fee. You pay more each month and you pay less in surprises, which matters more as equipment ages and component failures stop being exceptional. The catch is that comprehensive rarely means everything. Obsolete components, vandalism, water damage, power surges and anything classed as modernisation usually sit outside it.
The useful question is not which model is better. It is which one the provider is quoting, what sits outside it, and what the realistic annual spend looks like once the excluded items are added back. Ask for that total, not the monthly figure.
If you are switching
Changing providers is less disruptive than most building managers expect. The handover is where the value leaks. Ask the outgoing lift company in writing for the full maintenance history, drawings, controller parameters and any access credentials, and set a date for it. Do this before the notice period starts, not after. A new provider working blind on an unfamiliar controller will spend the first six months learning your lift at your expense.
Get the exit terms clear at the same time. Notice periods on lift contracts run longer than most people assume, and some agreements roll over automatically if the date passes unnoticed. Check yours before you start conversations with anyone else, because the renewal date sets your actual timeline.
The questions worth taking into the meeting
If you take nothing else from this, consider these questions:
- What is your entrapment rate per lift per year, and how do you define an entrapment?
- How many technicians do you have within travel distance of this building, and what are they trained on?
- What sits outside this contract, and what would the door operator failing in month seven cost me?
- Do the maintenance records belong to us, and do they travel if we leave?
- What can you see remotely, and what will I be able to see?
A provider who answers those directly is showing you how they will behave for the next five years. So is one who does not.
If you want a second opinion
We maintain lifts across New Zealand, including plenty we did not install. If you are weighing up your options, the detail on what a contract covers sits on our KONE lift maintenance services page. If you would rather just ask someone a direct question about your building, our customer service team is the place to start.